New Products

2" Flat Top Flipper Set. Left and Right flipper included. Has raised letters in blue. Has screw hole on top.  Used on Gottlieb pinball games...

2" Round Top Flipper Set. Left and Right flipper included. Has raised letters in Blue. Used on many Pinball machines from the 1960's to the 1980's....

2" Round Top Flipper Set. Left and Right flipper included. Has raised letters in black. Used on many Pinball machines from the 1960's to the 1980's....

2" Round Top Flipper Set.  Left and Right flipper included.  Has raised letters in white.   Used on many Pinball machines from the...

Flipper Coil used on many Data East, Sega and Stern pinball machines.  Single winding 23 gauge wire with 900 turns.  Comes with sleeve and...

 Data East/Sega coil stop with the large 1/4" hole.  Plug is 5/16" deep.

Bulb Socket Mini Bayonet, most common used on electro-mechanical pinball games.  

Stern 4-Bank Target Rest Ledge,  Length 5 3/8".

Pop Bumper Skirt Spring for most all pinballs.  Goes between the skirt and the base.  About 5/8" long.

Stern/Sega pinball Flipper Coil Stop.  Has 3/16" holes and 1/4" deep plug.  

Pop Bumper coil Spring 10-326.  Used on most pop bumpers of all makes.  About 1 13/16" long.

Capacitor 2.2uf 250v for Bally/Williams early electronic pinball flippers.  Shunts the arcing to save your End Of Stroke Switches.  This a...

Black Allen Head Screw. 10x32x3/4 used on Bally/Williams Flipper Coil Stop.  #10 screw x 32 turns per inch x 3.8" thread depth.  ...

Priced for 1 bulb each. From Generic BULK pack. Bulb #555 Wedge Base 6.3 Volt, Standard pinball bulb.

Opto Magnet Bracket Assembly for Williams "No Fear" pinball machine.

Vertical Up-Kicker Cap with screw hole, Williams/Bally.

Vertical Up-kicker Compression Ring, Data East/Sega.  Three needed on Cap.  These hold the Dowel Pin in place.

Vertical Up_kicker Spring, Data East/Sega.  Goes under the popper cap.

Vertical Up-Kicker Plunger, Data East/Sega. Overall Length 3 3/4" long.   Data East/Sega pn: 515-5352-00 is and upgrade for pn: 515-5096-00.

Cap on Data East Vertical Up-Kicker.  Can be used on William/Bally if you purchase the thicker plunger (515-5352-00)  and dowel pin...

Coil sleeve with flange 1 7/8” long with 3/16" flange. Williams/Bally pn: 03-7067 Gottleb pn: A-6087  aka The Short Bell Sleeve. Chicago Coin...

Pulley for Fishing Reel on Fish Tales and Ferris Wheel on Hurricane.  Mounts on the motor shaft.  Outside diameter 1 1/2".

Flipper return spring for Sega and Stern pinball machines.  Similar to Bally/Williams but stronger. Sega/Stern pn:265-5035-00

Data East flipper return spring. Data East pn: 265-5029-02

Pinball Trough Switch.  Sub-Micro with roller and diode.  Soft pressure activation.  About 25 grams to activate.  Replacement for...

Black Allen Head socket screw for Data East flipper pawl/crank.  Dimensions #10 screw x 32 threads per inch x 1 3/4" long. Heavy duty black...

Black Allen Head socket screw for Data East/Sega flipper coil-stop with the large holes.  Dimensions 1/4" diameter screw x 3/8" long treads x 20...