All Products

Bell Armature for Chime units, knockers and other noisy places in pinball machines. 2 1/2" long.  Solid metal body.  Has nylon tip. ...

Old School!  Antique Circuit Tester with a 12 volt bulb.  Very simple to trace live voltages.  The bulb can be changed to other...

Data East pinball coil 090-5002-02 with diode.  N.O.S.  24-900 winding

Data East pinball coil, part number 090-5004-00. N.O.S  27-1500 winding

coil 090-5012-00 (26-800/30-2600) 50v  Data East  N.O.S

Data East pinball coil, part number 090-5015-00, N.O.S.   27-1400 winding

Data East/Stern pinball coil, part number 090-5020-02,   22-900 winding

Stern pinball coil, part number 090-5023-0B (22-600)

Data East/Stern pinball coil, part number 090-5032-00  N.O.S.

Bally/Williams pinball coil, part number AE1-25-1000, N.O.S.

Very common coil mounting bracket for Bally/Williams pinball games.  For example: Williams Outhole Kicker or Slingshot coil assemblies. ...

Williams/Bally pinball coil, part number SM-30-1100-DC.  N.O.S.

Williams/Bally Coil Plug Stop.  Used on Bally Saucer Hole Kicker Assembly and others.  This is New Old Stock.  When they are gone they...

Coin switch with double bend coin wire for Arcade and Pinball doors.  Williams and others.  891-1116-16

Coin switch actuator, straight wireform.  Works on coin switch 891-1116-16.

Coin Switch with straight wire, 3 3/8".  Fits old Bally/Williams and others.  Note the hole pattern. Bend wire to suit.  27-1092

Cotter Pin, steel.  1/16" diameter x 3/4" long (end to end). 

This product has been declared hazardous material.  UPS and USPS will not ship it.  We no longer offer this product unless it is picked up...

CR2023 or CR2025 Button coin cell 3 volt battery holder.  Solder in through-hole. 

Plastic crank used on Adam's Family Bookcase motor or Star Trek Next Generation Gun Turrets.

Bally pinball Crate Kickout Popper weldment for Scared Stiff.

This Creature from the Black Lagoon pinball by Bally came from Europe.  Many games from Europe come in very dirty condition.  We think this...

Pin Crimping Tool for connector housings.  Crimps the .100 and .156 F type pins sold here.  Also works on .062 and .093 round pins. ...

Cyclone pinball by Williams  1988

Here is a repair of a Williams Defender video game.  This brings back fond memories.  I was invoved with helping Williams get the bugs out...

01/17/2013 16:30:03  Cleaned and waxed playfield. New rubbers and light bulbs. Main issues: Repaired several light sockets (1 missing) on big...

This repair of a Dig Dug by Atari was all about the power supply.  The symptoms were erratic resets and garbage on the screen. The customer had...

Ding Dong EM Pinball by Williams made in 1968. This repair job had all the usual problems of an old Williams game.  The big thing on these is...

Price is for 1 each.  Replacement, Heavy duty diode.  6 amps at 400 volts.  Used on Williams Power Driver boards.  Good for...

Diode, 1 amp 1000 volts. 1N4007 Datasheet

Price is for 1 each.  Diode, 3 amps 1000 volts. 1N5408 Datasheet

Price is for 1 each. Dip Switch 8 position, rocker switches. 

Price is for 1 each. Dip Switch 8 position, rocker switches, with rubber moister shield.

Williams System 11 or System 11a display kit.  Replaces pn:D-10877.  All low voltage 5vdc operation.  Remove the high voltage fuse on...

Williams pinball "Star Trek" diverter arm on underside track.  Common failure.  Ref: A-17268

Bally pinball diverter bracket used on NBA Fastbreak and Cactus Canyon.

This is a repair archive of a Dolly Parton pinball, by Bally from 1979. This Dolly has all the problems found in a vintage Bally.  Bad paint on...

Donkey Kong was a hot game in 1981.  Nintendo had such a hit the price at our distributor went up $2000 for the first 6 months.  If ya had...

Standard Pinball dot matrix display for most DMD type games.  128 dots x 32 dots resolution.  Monochrome. 

Drop Target set of 7 targets.  Marked 1 through 7 in Red.  Used on Sky Jump and Sky Dive. Special Order Only.  Click the Ask A...

Williams pinball drop target reset assembly, 4 bank.  Includes 01-13274 reset plate.

E-Clip for shafts with a .25" diameter groove.  Very common on Electromechanical Pinball machines. Price is for 1 each.  Picture may vary.

E-Clip for shafts with a .25" diameter groove.  Spring type used on turntables and other applications.  Heavy duty, not for Gottlieb Reels....

This game is not for sale.  This pinball shop-out took a long time to complete.  The customer wanted a "really good job",...

ERF2030 N-Channel MOSFET, CB Radio Upgrade.  This is the famous transistor to out perform several CB radio outputs, long ago.  We found...

Here is a repair and restoration of an Extra Inning Baseball made by Williams in 1962.  These games are not as popular with collectors as they...

Here is a "Man Running Unit" from an Extra Innings baseball game by Williams made in 1962.  The gear motor broke some teeth on the first...

F-14 Tomcat Pinball by Williams from 1987. This poor pinball had a lot of paint missing between the flippers around the lighted arrows.  Looks...