All Products

Black Allen Head socket screw for Data East/Sega flipper coil-stop with the large holes.  Dimensions 1/4" diameter screw x 3/8" long treads x 20...

Black Allen Head Screw. 10x32x3/4 used on Bally/Williams Flipper Coil Stop.  #10 screw x 32 turns per inch x 3.8" thread depth.  ...

Handy Allen Wrench (SAE - US) with 8 fold-out sizes.  Sizes are .050(1/20"), 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" and 5/32".  The body...

Bally Coil, Flipper AQ25-500/34-4500, with sleeve. Substitute/last longer for Bally AQ25-500/34-5050.

Switching regulated power supply, 133 Watt.  Generates 5 volts at 16 amps, 12 volts at 4 amps and -5 volts at 1 amp.   Has screw-lug...

This is a repair of an Asteroids arcade game made by Atari in 1980.  The monitor was dead on this one.  These old monitors are an XY type...

Yep, an old Atari Asteroids.  This one needed the game board fixed and the monitor re-capped.  The Workorder notes follow: 04/01/2013...

Attack from Mars Pinball by Bally  1995

Williams Pinball Auxiliary Driver Power Board for Cyclone.  Good Pull.  Sold AS-IS Working.  Works on many other games. No warranty...

Aztec pinball by Williams from 1976.  This 4 player mechanical has a lot of score reels to clean!  This one was is in fairly good shape on...

Reel coil used on Williams EM pinballs.  B1-26-800 is the replacement for the B-26-800.  Used on Reel Coils,  Stepper Unit Reset....

This pinball, "Bad Cats" by Williams (1989) looked like it needed a long vacation from route duty!  A little rough but still a great...

This 1980 Bally slot machine was used in a club in Japan for US Army personnel.  It pays mostly small amounts and has a conservative pay...

This Bally SLot Machine, model E2243-25,  is a 5 line play game.  These games are becoming collectable and in my opinion are more fun than...

Bally Pinball - Squawk and Talk sound board, pn: AS2518-61B.  Repaired and tested in a game.  It is currently setup as a Fireball...

This repair is on a 30 year old video poker by Bally.  The machine came in with garbage on the screen.  After replacing the battery and...

This is a repair archive of a Banjo Pinball.  Made by Exhibit in 1948.  We usually don't take in games this old.  They can be hard...

Banzai Run pinball by Williams  1988

Barrel Spring for pinball shooter rods.  1" long used on older Gottlieb and Bally pinball machines. Substitute for SP-247.

Barrel Spring for pinball shooter rod. 3/4" long. 

Heavy Duty barrel spring for pinball machine shooter rod.  1" long.

Battery - NiCad 3.6v  1/2AA  400MA.  Perfect for old Bally/Stern MPU boards.  Attach it on long wires to keep any leaks off your...

3.6 volt NiCad rechargeable Battery, 50mAH.  5/8" high x 7/16" width x 1 3/16 long. Price is for 1 each.

Battery Holder, for 2 AA batteries with 6 inch leads.  Great for replacing 3 volt batteries in slot machines.  Use double sided tape to...

Battery Holder 3X AA with leads.

An "alternate" pinball machine battery holder with wire leads.  Great for mounting your batteries off the MPU board to protect your game. ...

Battery Holder (phem base)  for pinball machines.  Three AAA batteries.  PC mount. These should not be used.  Install the...

Battery, 3.6 volt Lithium 1/2 AA type with wire leads

Battery, 3.6 volt Lithium AA type with wire leads    

Price is for 1 each.  Battery, Lithium 3 volt Button type BR2030. Price is for 1 each.

Price is for 1 each.  Battery, Lithium 3 volt Button type CR2032.  Most common battery in pc computers and all kinds of gadgets.  The...

Price is for 1 each.  Battery, Lithium 3 volt Button type CR2032 with 2 pin PC mount solder in.. Price is for 1 each.

Price is for 1 each.  Battery, Lithium 3 volt Button type CR2354, 23mm.  For IGT enhanced boards and CDS slot games.

Price is for 1 each.  Battery, Lithium 3 volt Button type CR2430. Price is for 1 each.

Price is for 1 each.  Transistor BDX33C, 100v, NPN.  We use these as amplifier drive outputs on German OMT Wurlitzer vinyl Jukeboxes....

Price is for 1 each.  Transistor BDX34C, 100v, PNP.  We use these as amplifier drive outputs on German OMT Wurlitzer vinyl Jukeboxes....

Sold by the inch! Self Adhesive Foam strip for pinball glass.  Attaches under the front metal lock down bar.  Seals the glass to force...

Big Deal pinball by Williams  1977  Electro-Mechanical game.

Big League Baseball by Chicago Coin.  This baseball is the digital version made in 1975.  The circuit board is populated with first...

This is a 1973 electromechanical pinball from Gottlieb.  This one had a lot of problems under the hood.  We pulled the mech panel out and...

Big Top pinball by Gottlieb made in 1964.  This 50 year old pinball was extremely dirty and in bad condition.  Everything needed to be...

This Bally electromechanical pinball machine is a good example of state of the art in 1974.  The "Bow and Arrow" is a 4 player with a lot of...

Price is for 1 each.  MP606G Bridge Rectifier, 6 amp,  600v. With wire leads. Generic, many brands. Dadasheet

Price is for 1 each.  Bridge Rectifier, offset wire lead, 35amp, 600 volts or more.  Picture is for reference only, actual device may...

Bronco pinball by Chicago Coin  1963  Electro-Mechanical game.

Price is for 1 each.  BTA12-600B, Triac 600v, 12a Picture is for reference only, actual device may differ. Datasheet

Bulb socket for standard bayonet light bulbs, 2 conductor. Single bend, lay down.  3/4" deep socket with 5/8"  long bracket.  For #44,...

Bulb socket for standard bayonet light bulbs, 2 conductor. Double bend.  3/4" deep socket with 5/8" bracket.  For #44, 47 and many others.