All Products

Intel uD8279C-5 Programmable Keyboard/Display Interface.  Vintage new old stock. Datasheet

Light Bulb #86.   Box of 10.  Mini Wedge base.  6.3 Volt, .20 amp. (also for IGT S+/PE+/Old Bally Slot Machines.  For the...

Fugitsu MLB8742H NMOS Universal Peripheral Interface 8 Bit Microcomputer.  UV erasable.   Requires a 21 volt programmer....

Vintage P8749P Microcontroller made by Intel.  This is a program once device.  This is new old stock from our old parts bins. Datasheet

Box of 10.  Bulb #89 Bayonet Base 13 Volt.  Generally used as a flasher bulb on pinballs.

9 volt battery connector with 6 inch wires. 

Bag of 10.  Bulb #906 Wedge Base 13 Volt.  Generally used as a flasher bulb on pinballs.

Texas Instruments TMS9118NL Video Display Controller (VDP).  A  mid 80's variant of the TMS9918 series chips.  Has 1 pin difference...

Texas Instruments TMS9128NL Video Display Controller (VDP).  A  mid 80's variant of the TMS9918 series chips.  New old stock from our...

Williams/Bally Pinball plunger for Vertical Up Kicker (ball popper).  3 7/8" long.  See also 20-9314-7 and 03-8053 .

Gottlieb pinball coil A-17891.  For Roto-Target.  With diode and 2 1/2" Sleeve.

William EM (Electro Mechanical) Pinball coil.  Used on many EM games for Pop Bumpers, Drop Targets Replaces Chicago Coin  J-22-550,...

Williams coil A-23-600.  For EM (Electro-Mechanical) pinball machines.  Used for Stepper Unit "Step Up" and other applications. Replaces...

Flipper Coil  A-25959 used on Gottlieb/Pemier pinball machines.  Includes sleeve.

Gottlieb Flipper Coil, A-5141, Gottlieb EM pinballs.

Gottlieb Bells/Chimes coil A-5143.  Comes with 2 3/4" Flange coil sleeve A-5142 . This is just 1 of several coils used.  Please check your...

Gottlieb Pinball coil.  Common coil on Pop Bumpers and Kickers.  With diode and sleeve.  24 gauge wire with 780 turns.

Gottlieb Chimes coil A-5194.  Comes with 2 3/4" flange sleeve 03-7067-6 .  With diode. 24 gauge wire with 780 turns.

Knocker/Bell/General Coil with diode A-5195.  A general use coil.  Used on Gottlieb Solid State pinball machines, System 80A, 80B and...

Bally EM Striker and Bushing Assembly A-550-06.  Pinball Chime unit plunger with nylon tip.  1 11/16" long.  Hollow tube body. ...

Coil used on Gottlieb pinball machines for ball gate and other uses.  A-9735

Gottlieb EM Hold Coil, A-9736. Replaces R-20-5

Gottlieb EM Hold Coil, A-9738. Replaces A-3498

Gottlieb EM Hold Coil, A-9740

Williams/Bally 5" Bell coil A2-23-750.  24 volt coil.  Comes with 2 3/4" flange sleeve 03-7067-6. 

Williams Chimes coil A2-26-1025.  Comes with 2 3/4" flange sleeve 03-7067-6 . Also used on Bally, replaces A-26-1025.

Williams/Bally Pinball Bell/Knocker coil A2-26-1300. 50 volt coil.  Comes with 2 3/4" flange sleeve 03-7067-1.

Here is Addams Family Gold the "Special Collectors Edition" number 0995.  This machine is in excellent condition!  We took plenty...

Williams/Bally Coil AE-23-800. Comes with sleeve 03-7066 (1 3/4").  Solder eyelet tabs. Used on pop bumpers, outhole kickers and many...

Bally/Stern/Williams pinball coil, part number AE-26-1200 with diode and sleeve. 

Williams pinball coil AE1-26-1500 with diode.

Bally pinball flipper coil, older electromechanical made before 1978. No Diodes. With 1 5/8" sleeve.

Al's Garage is a rare pinball made by Alvin G in 1992.  The company was short lived (1991-1994).  Parts are hard to find.  General...

This repair is on the computer only of an Aliens Extermination arcade game made by GlobalVR.  This was a service call.  The game showed no...

Handy Allen Wrench (SAE - US) with 8 fold-out sizes.  Sizes are .050(1/20"), 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" and 5/32".  The body...

Bally Coil, Flipper AQ25-500/34-4500, with sleeve. Substitute/last longer for Bally AQ25-500/34-5050.

Switching regulated power supply, 133 Watt.  Generates 5 volts at 16 amps, 12 volts at 4 amps and -5 volts at 1 amp.   Has screw-lug...

This is a repair of an Asteroids arcade game made by Atari in 1980.  The monitor was dead on this one.  These old monitors are an XY type...

Yep, an old Atari Asteroids.  This one needed the game board fixed and the monitor re-capped.  The Workorder notes follow: 04/01/2013...

Attack from Mars Pinball by Bally  1995

Aztec pinball by Williams from 1976.  This 4 player mechanical has a lot of score reels to clean!  This one was is in fairly good shape on...

Reel coil used on Williams EM pinballs.  B1-26-800 is the replacement for the B-26-800.  Used on Reel Coils,  Stepper Unit Reset. 

This pinball, "Bad Cats" by Williams (1989) looked like it needed a long vacation from route duty!  A little rough but still a great...

This 1980 Bally slot machine was used in a club in Japan for US Army personnel.  It pays mostly small amounts and has a conservative pay...

This Bally SLot Machine, model E2243-25,  is a 5 line play game.  These games are becoming collectable and in my opinion are more fun than...

Bally Pinball - Squawk and Talk sound board, pn: AS2518-61B.  Repaired and tested in a game.  It is currently setup as a Fireball...

This repair is on a 30 year old video poker by Bally.  The machine came in with garbage on the screen.  After replacing the battery and...

This is a repair archive of a Banjo Pinball.  Made by Exhibit in 1948.  We usually don't take in games this old.  They can be hard...