All Products

Price is for 1 each. TO-220 transistor insulator plastic washer.

Price is for 1 each. T0-220 Transistor Heatsink. Tin plated solid copper. Width 20mm, height 23mm.

Price is for 1 each. T0-220 Transistor Heatsink, large. Black. Width 25mm, height 42mm, depth 24mm.

Price is for 1 each. T0-220 Transistor Heatsink. Black. Width 19mm, height 19mm.

Price is for 1 each.  T0-3 Transistor Heatsink.  Black Anodized Aluminum.  1.25" tall.

Price is for 1 each.  Heavy duty transistor socket for TO-3 style transistors.  Great for amplifiers, monitors, etc.  Perfect on...

Price is for 1 each. Standard duty transistor socket for TO-3 style transistors, fiber-board type. Great for amplifiers, monitors, etc.

The Top Gun Challenge dart machine was made around 1987 by Arachnid.  It probably started out as a model 6000 but looks like this one was...

Bally pinball trap door bracket for Theater of Magic.  Original old stock, NOT stainless steel.

Twilight Zone by Bally/Midway from 1973.  This is an old archive from our old Austin Highway shop, back in the late 90's. Twilight Zone may...

Ultimate MPU aftermarket replacement board (eprom v8.2) for early Bally/Stern electronic pinball machines.  Shipping insurance included. ...

Williams/Bally cap for Vertical Up Kicker.  Has neck and slot for dowel pin type plunger.  See also A-11336 and 20-9314-7 .

Vertical Up-Kicker Cap with screw hole, Williams/Bally.

Vertical Up-kicker Compression Ring, Data East/Sega.  Three needed on Cap.  These hold the Dowel Pin in place.

Williams/Bally Pinball plunger for Vertical Up Kicker (ball popper).  3 7/8" long.  See also 20-9314-7 and 03-8053 .

Vertical Up-Kicker Plunger, Data East/Sega. Overall Length 3 3/4" long.   Data East/Sega pn: 515-5352-00 is and upgrade for pn: 515-5096-00.

Cap on Data East Vertical Up-Kicker.  Can be used on William/Bally if you purchase the thicker plunger (515-5352-00)  and dowel pin...

Vertical Up_kicker Spring, Data East/Sega.  Goes under the popper cap.

 Dowel Pin inside the cap on a Bally/Williams Vertical Up Kicker (VUK).  Dimensions 3/32" x 1/2".  This will fit loose.  Get 3 of...

Price is for 1 each.  Use the VJ848 (800v, 10 amp) as a direct replacement for bridge rectifier VJ248 (200v, 10 amp).  Used on early...

Here is a repair of Vulcan, an electromechanical pinball made by Gottlieb in 1977.  This game had severe rust and internal corosion issues....

Whirlwind pinball by Williams.  Here is great game that needed a lot of love.  It was living in a detached garage and suffered from the...

Whitewater pinball by Williams Sorry for the bad pictures.  Lost the good pics.  This game is definately not a collector's dream. ...

NEW Replacement width coil (L503) for an Electrohome model GO7 monitor.  Common failure part. 

Here is a Wild Wild West by Gottlieb from 1969.  This had not worked for many years.  See the before pictures near the bottom of the...

Williams "Grande Prix"  pinball made in 1976.  Hey this is the year I graduated from high school!  I was already repairing...

Original working pull from a Williams Cyclone Pinball Machine.  Sold AS-Is Working.  Used in many system 11 games.  Probably needs a...

Wireform Material to make your own pinball wireforms for the ball gates.  This is a set of 3 different thinkness wires - 51, 59 and 71...

This repair is on a World Series pinball made in 1972 by Gottlieb.  This pinball awards extra balls as "Runs".  This machine was completely...

Large allen wrench to turn the lock on the backbox of newer pinball machines.

This repair is on a Wurlitzer (German) jukebox model OMT 1015.  The OMT stands for "One More Time" in reference to the original 1946 model...

Yoke assembly used on Bally in-line drop targets.

Coil for Williams EM pinball pn: Z-28-1200 on Lock Relay. Replaces Z-28-1150, the old coil ran too hot.

Coil for Williams EM pinball pn: Z-29-1250 hold coil.

Williams/ United Shuffle Alley pin reset Coil. Also replaces United 6-31P-2000.

Coil, Z-31-2300 - for Williams Baseball Games and others.  (Pinch Hitter, World Series)

Coil, Z-32-2700 - Williams Shuffle Alley Games.

ZILOG Z8002PS NONSEG Microprocessor used in early arcade games.  Rare, new old stock from our old parts bins. Datasheet  

Z80A 4MHz NMOS microprocessor made by many brands. This is used in many arcade games and early home computers. All have tested to at least...

Z80B (Z084006) 6.17MHz NMOS microprocessor made by Zilog.  This is used in many arcade games and early home computers.  This is a fast...