All Products

Stern, Data East, Sega switch, fork, verticle up kicker.

Stern, Data East, Sega switch with formed flat blade

Super Spin pinball by Gottlieb  1977  Electro-Mechanical game.

Here is a 1974 Electro-mechanical pinball from Williams.  This game is holding up well after all the years.  The back-glass has started to...

This Supersonic pinball machine repair/shop-out was typical of this series.  These old Bally's almost always need the pins repaired on the power...

Surfer pinball from Gottlieb made in 1976.  This is an electro-mechanical pinball. This is an electro-mechanical we sold.  The cabinet is a...

"Suspense" is a Williams electro-mechanical pinball from Williams circa 1969.  This one is a bit rough but cleaned up O.K...  The...

Replacement for Williams switch 5647-12693-06-china. Yes this is a cheap copy made in China. It has a 6/8" straight blade with a metal roller. The...

Switch - Williams Bally pinball.  Micro with 1.5" flat blade.  5647-12693-11

Replacement for Williams switch 5647-12693-31-china.  Yes this is a cheap copy made in China.  It has a 2 1/8" straight blade.  The...

Williams/Bally pinball switch.  With wireform.  5647-12693-32

Williams/Bally Switch 5647-12693-36. Mocro with 1 5/8" blade.

Switch Micro 5647-12693-47.  With custome wireform.

Switch Micro 5647-12693-58

Snap Action Micro-switch with long (1 inch) hinge roller. Single pole double through. PN: V-156-!C25

Snap Action Micro-switch with short (1/2 inch) hinge roller.  Single pole double through.  PN: V-155-!C25

Cherry Sub-Microswitch DA5, body only, no actuator.  Many uses. Slot Machines, pinball machines....

Pinball Trough Switch.  Sub-Micro with roller and diode.  Soft pressure activation.  About 25 grams to activate.  Replacement for...

Data East Pinball vertical Up-Kicker switch. 

"Tales from the Crypt" pinball made by Data East in 1993.  This was a consignment sale we took in.  This machine was working when it came...

Bally pinball drop target, bullseye Blue with tombstone shape top.

Bally pinball drop target, bullseye RED with tombstone shape top.

Data East/Sega pinball drop target, non wedge, white.  545-5048-01

Target Drop for Gottlieb Spiderman and Haunted House pinball with "web" design.

Stern / Data East / Sega pinball drop target, wedge shape rollover , white. Part Number 545-5533=01.  Length 6 1/8", Width of top wedge 1 3/16",...

Target, Oblong Stationary, front mount, Yellow.  For Williams/Bally pinball machines.  A-18530-6

Round Green standup target with front mounting bracket for Williams pinball machines.

Round Red standup target with front mounting bracket for Williams pinball machines.

Round Yellow standup target with front mounting bracket for Williams pinball machines.

Replacement 1" round YELLOW target, stud type, with push clip.  Used on 50's Williams/Bally/Gottlieb pinball target switches.

Replacement 1" round WHITE target, stud type, with push clip.  Used on 50's Williams/Bally/Gottlieb pinball target switches.

Replacement 1" round RED target, stud type, with push clip.  Used on 50's Williams/Bally/Gottlieb pinball target switches.

Replacement 1" round RED/White/Blue Bullseye target, stud type, with push clip.  Used on 50's Williams/Bally/Gottlieb pinball target switches.

Target, Yellow/Orange? skirted square standup - Williams/ Data East  (500-5640-16).  Front or back mount.

"Taxi" by Williams made in 1988.  This pinball was a mess to clean up and repair.  The display glass was loose and allowed to break off...

Here is a Nugent by Stern.  Someone installed a Two Bit score aftermarket Dash-35 CPU and Fixit board to run the firmware.  All the...

This Tempest by Atari is one of the best games made in the early 80's.  These games made buckets of money.  They have an XY color monitor...

Terminator 2 Judgment Day pinball by Williams  1991

This "Terminator 2, Judgment Day" pinball by Williams was made in 1991.  This happens to be Lee's favorite pinball to play! ...

The Amazing Spiderman pinball by Gottlieb made in 1980.  This machine had significant paint loss on the playfield, dead power supply, dead...

The Flintstones pinball by Williams.  Very fun game to play!  Really love hearing Dino bark.  This game had a few tricks up it's...

This is "The Getaway - High Speed II" circa 1992.  Williams made a lot of these.  They were good earners.  If you ever get a...

The Incredible Hulk pinball by Gottlieb  1979

The Lord of the Rings Pinball by Stern Pinball made in 2003. This shop-out was very hard to clean.  It can be a fight to get parts off and...

The Simpsons pinball by Data East  1990

Price is for 1 each.  TIP102 Transistor, NPN Darlington, 100v CE, 8a.  Major Brands.  Replacement for TIP120, TIP122 and...

Price is for 1 each.  TIP107 Transistor, PNP Darlington, 100v CE, 8a.  Used on Williams/Bally Power Driver boards. Williams...

Price is for 1 each.  TIP122 Transistor, NPN Darlington, 100v CE, 5a.  This is the original part number for early Bally, Stern and Williams...