All Products

White rubber ring.  3/8" inside dimension.

White rubber ring.  4 1/4" inside dimension.

White rubber ring.  5 1/2" inside dimensions.

Rubber ring, white, 5/16" inside diameter.

White rubber mini post.  3/8" outside diameter.

Standard White Mini Post (27/64” ID) (7/16” OD)

Ripley"s Believe it or Not pinball by Stern Pinball.  This game came in from a bar in Austin (G& S Lounge) on South First Street. ...

This repair is a Mechanism from a Rock Ola Nostalgia  "Bubbler" CD Jukebox made in 2005.  The grease on the gripper arm turned to...

This very old Rockola 1422 started out as a service call, as most do.  As usual it needed much more than we can do on location.  After...

This Rockola 460 juke box was brought to us in horrible condition.  The top glass was replaced with clear plate glass that just looked...

This Jukebox repair is on a 1975-1976 Rockola model 464.  This old work horse needed a lot of work to get back to reliable condition.  The...

This is a Used Pull.  Rowe CD jukebox Eprom in the Central Control Computer.  Version 4.3.  This is the last version and is backward...

Here we have Rowe TI-1 that has a tube amplifier and a mixture of electromechanical and early transistor technology.  These jukeboxes have a lot...

This is a used Rowe AMI stereo cartridge we pulled from a Rowe model R-80 made in 1976.  We tested it on our R-82, sounds great!  Good Bass...

Here is a 45rpm Rowe Jukebox model R86 we fixed up for a happy owner.  This one had a bad CPU Chip that required an upgrade since the chip is no...

Rubber bumper stop for Data East/Stern flipper assembly.   5/8" wide x 1/4" shaft x 3/8" long.  Used on other application also. Happ...

Repair archive of Satin Doll Pinball by Williams.  The repair notes follow: 05/27/20 The game came in with mold, rust and a black substance all...

Price is for 1 each.  2N5060  Thyristor SCR 30V 800mA.  Commonly used on Bally/Stern pinball machine Lamp Driver Boards. Picture is...

Price is for 1 each.  SCR, MCR106 Tryrister 400v.  Commonly used on Bally/Stern pinball machine Lamp Driver Boards. Picture is for...

Price is for 1 each.  Thyristor, Sensitive gate 0.8 A 400 V SCR. P0102 Datasheet

Price is for 1 each.  SCR S4012R 12A 400V, TO220 package. Datasheet

Price is for 1 each.  Small slotted screw, 6x32 threads,  1/4" long.  Set Screw.

Screw Phillips Head #6 x 32 turns per inch x 2 1/2" long.

Screw Slotted #6 x 32 turns per inch x 2 1/8" long.  Note:  The last 1/8" is not threaded.

50 Years old and still working!  At least it is now  This old juke was a little tempermental at first but it finally came to life.  A...

Seeburg Motor Drive Coupler, part number 245083. 1 required. New reproduction.

Seeburg Motor Support Plug. Under the transport motor. 1 required. New reproduction.

Seeburg Jukebox Needle for Pickering 340D cartridge. Diamond, new. Sold in pairs. Fits many models. Stereo.

Seeburg Rubber Bumper. End of travel bumper on transport frame. 2 required.

Seeburg Transport Motor Mount Rings for 4 wire motor. 2 required. New reproduction.

Seeburg Turntable Rubber Drive Bushing. 2 required. New reproduction.

Sega Pinball Large 192x64 dots.  This is a GOOD PULL from a working game.  No missing dots or lines.  Sold AS-IS Working.  No...

Price is for 1 each.  SFH6106-3 - Optocoupler, Photo-transistor Output.  We use these on Bally Slots Hopper Controller board. Datasheet

Williams Pinball Flipper Coil.  SFL-19-400/28-400 Used on Algar, Alien Poker, Black Knight,  Black Knight LE, Blackout, Firepower, Jungle...

Williams Flipper Coil, with diode and sleeve.  pn: SFL-20-300/30-800-DC Gorgar, Hot Tip, Lucky Seven, Stellar Wars, Pokerino, World Cup,...

Generic Pinball Shooter rod assembly, no logo, black handle.  Fits most newer pinballs. Williams, Bally, Stern and others.  Includes black...

Pinball "Beehive" style shooter housing.  Used on Gottlieb, Chicago Coin and others. Screws included.

Replacement Shooter Rod for pinball games.  8-1/4" with black knob.  Measured from knob rim to end of shaft.   Shaft length is 7...

Shooter Rod E-Clip for pinball.  For 3/8" shaft rod. Williams 20-8718-1, 20A8718-1 Bally P2891-8  Chicago Coin/Old Stern 17A-104-37...

Replacement Shooter Rod for Bally/Williams  pinball games.  8-3/4" total length (Point to Shaft End) with polished pointed knob. ...

Replacement Shooter Rod for Gottileb pinball games. Knob rim to end of shaft is 7 3/4".  Shaft length is 7 3/16".   Shaft to "E" clip notch...

Shooter Rod Nylon Housing used on older Gottlieb and Bally pinball machines.

Shooter Rod Trim Plate used on older Gottlieb and Bally pinball machines.

Shooter Spring Max Strength for pinball machines.  The most powerful strength pinball shooter rod spring.  Sometimes painted RED. ...

Gottlieb Standard pinball shooter spring.  Medium strength not painted, (Silver).  Sometimes called Medium Strength.  Used on many...

Gottlieb Weak Shooter Spring. Used on many makes and model pinball machines. Length 6 1/2", inside diameter 3/8".   Stern Green (266-5001-04)

Black rubber shooter plunger tip for pinball machines.  ref:545-5027-00  ref:A1344

Price is for 1 each.  SK3443 Transistor Picture is for reference only, actual device may differ. Datasheet