All Products

Replacement Power Cord for pinball games.  14 feet, grounded, solder in, flat 3 wire.  Works on old video games also.  Pacman, Galaga,...

Here is a shop out repair of a Bobby Orr Power Play pinball by Bally made in 1977.  These old Bally's always have connector problems....

Power plug, 3 prong, UL Listed.

Switching Regulated Power Supply 12vdc 3 amp brick.  With power cord.  Dimensions:  3 5/8" x 1 7/8" x 1 1/4"

Switching Regulated Powe Supply 12vdc 5 amp brick.  With power cord and 12v plug to terminal lug converter.  Common failure part on many...

Closed frame dual output adjustable power supply. Outputs are 5 VDC at 4 amps, 12 VDC at 1 amps.  Good replacement for 60 in 1 games.  It's...

Closed frame dual output adjustable power supply.  Outputs are 5 VDC at 6 amps, 12 VDC at 3 amps. 

This Premier Water World pinball is one of the last games made by Premier/Gottlieb.  This is a "system 3" design.  These games were not...

Push button switch. Standard generic.  .250" terminals 15 amp, 50 gram force.

Quarter coin push-chute for pool table.  Can be adjusted for 25 cents, 50 cents or a $1.00.  ESD Vertical 4 coin.

Push nut to hold coin switch wireforn in place.  Use with wireform 02-2112.

Pushbutton for Arcade Games -  Blue.  Includes horizantal mount micro switch with .187" width blades.

Pushbutton for Arcade Games -  Green.  Includes horizantal mount micro switch with .187" width blades.

Pushbutton for Arcade Games -  Purple.  Includes horizantal mount micro switch with .187" width blades.

Pushbutton for Arcade Games -  Red.  Includes horizantal mount micro switch with .187" width blades.

Pushbutton for Arcade Games -  White.  Includes horizantal mount micro switch with .187" width blades.

This Quick Draw electromechanical pinball, by Gottlieb, was made in 1975.  This game took us a very long time to finish.  We should have...

Price is for 1 each.   Original (9mm short legs) optical interrupter used on several William/Bally pinball machines. 4 Leg.  This is...

This is a "Wood Rail" pinball called "Race Time" made by Gottlieb in 1959.  The customer brought this over with a peeling/destroyed back glass,...

Plastic Channel that holds the playfield glass.  Mounts inside the cabinet at the back end of the glass.  For Bally/Williams earl pinball...

Rebound Rubber - Brown.  For Gottlieb pinball machines. Also used on  Bally/Williams, Chicago Coin/old Stern.

Price is for 1 each.  Relay, Cube type with plug-in lugs.  DPDT, four 2 amp contacts.  240 volt coil.  4 form C. Datasheet

Price is for 1 each.  Relay - 2 pole double throw, 12 volts, 10 amps.  This is the original factory supplied relay under playfields on...

Price is for 1 each.  Relay - 2 pole double throw, 24 volts, 7 amps.  This is the original factory supplied relay under playfields on relay...

Relay - 2 pole double throw, 48 volts, 10 amps.  General Purpose.  PC mount connectors (solder in).   This type has the 6 contact...

Price is for 1 each.  Relay NEC, ET1-B3M1S.  Single pole single throw, 12v coil, 25 amp max current.  Automotive type. Datasheet 

Price is for 1 each.  Relay socket (type, 4 Form C) Printed Circuit Mount.  For plug-in relays with 14 pins, 4PDT. 

Price is for 1 each.  Relay socket PC mount to PC Mount.  In-line pins, not staggered.  For plug-in relays with 8 pins, DPDT. (Double...

Here is a Rescue 991 pinball made by Gottlieb in 1994.  This game has a very strange design in the Helicopter toy.  This gadget moves up...

Price is for 1 each.  Ceramic resistor' wire wound 330 ohm 7 watt.  Used on Williams system 11 flasher boards.

Price is for 1 each.  Ceramic resistor' wire wound 5 ohm 10 watt.  Used on Williams system 11 flasher boards.

Black Rubber ring for Flippers.  Small 1/2" x 1".  ref:545-5207-00

Black Rubber ring for Flippers.  Standard 1/2" x 1 1/2".  ref:545-5277-00

Red Rubber ring for Flippers.  Thin Beaded Style  3/8" wide  x 1". Gottlieb Pinball

Red Rubber ring for Flippers.  Small 1/2" x 1".  ref:545-5207-22

Red Rubber ring for Pinball Flippers.  Standard 1/2" x 1 1/2". Data East 545-5277 Williams/Bally 23-6519-4    

Red Rubber ring for Flippers.  Thin Style  3/8" wide  x 1 1/2".  ref:A13151

Rubber Ring - White  1 1/2" inside dimension.  Pinball rubber ring,

Rubber Ring - White  1 1/4" inside dimension.  Pinball rubber ring,

Rubber Ring - White  2-1/5" inside dimension.  Pinball rubber ring, usually for slingshot assemblies.

Rubber Ring - White  3" inside dimension.  Pinball rubber ring.

Ripley"s Believe it or Not pinball by Stern Pinball.  This game came in from a bar in Austin (G& S Lounge) on South First Street. ...

This repair is a Mechanism from a Rock Ola Nostalgia  "Bubbler" CD Jukebox made in 2005.  The grease on the gripper arm turned to...

This very old Rockola 1422 started out as a service call, as most do.  As usual it needed much more than we can do on location.  After...

This Rockola 460 juke box was brought to us in horrible condition.  The top glass was replaced with clear plate glass that just looked...

This Jukebox repair is on a 1975-1976 Rockola model 464.  This old work horse needed a lot of work to get back to reliable condition.  The...

This is a Used Pull.  Rowe Eprom in the Central Control Computer.  Version 4.3.  This is the last version and is backward...

Here we have Rowe TI-1 that has a tube amplifier and a mixture of electromechanical and early transistor technology.  These jukeboxes have a lot...