All Products

Bally "High Current" End of Stroke switch.  Used in games from 05/1980 to 11/1988.  PN: ASW-A20-34

Bally pinball Lane Change switch.  This mounts on a bottom flipper End of Stroke switch stack along with the normal E.O.S. switch.  It...

Bally/Williams flipper opto board.  New type 2 style.

Flipper Paddle for Gottlieb pinball machines from mid 1970's-Late 1980's.  

Left Hand Side Lever Assembly/Pawl. For flipper assembly replacement. Bally Part number A-3711-3. This is an advanced upgrade.

Bally Flipper Pawl, Left side.  For Linear flipper assembly.  A-3711-4. Enhanced version.

Right Hand Side Lever Assembly/Pawl. For flipper assembly replacement. Bally Part number A-3711-2. This is an advanced upgrade.

Bally Flipper Pawl, Right side.  For Linear flipper assembly.  A-3711-5.  Enhanced version.

Bally Flipper plunger for linear flipper assembly (1980 to 1988). Bally PN: S-496-217

Relay - 4 pole double throw, 6 volts, 5 amps.  This is the original Flipper Ground relay on the CPU/driver boards for many pinball models. ...

Flipper Return Spring - Bally.  Linear flipper assembly.  SP-100-363

Data East flipper return spring. Data East pn: 265-5029-02

Flipper return spring for Sega and Stern pinball machines.  Similar to Bally/Williams but stronger. Sega/Stern pn:265-5035-00

Williams/Bally flipper return spring.  3/16" round x 1 1/16" loop tip to loop tip.

Flipper Return Spring, tapered.   Williams Firepower 3/80  To Hurricane 08/91  PN: 10-376. Most common return spring with...

Flipper Return Spring.  Common on many Fippers/Kickers and other assemblies.  1 3/4" Long x 1/2" Diameter. Williams 10-135. Bally...

Fluorescent Lamp F14-T8, 15".  14 Watts, use starter FS-2

Fluorescent Lamp F15-T8, 18".  15 Watts, use starter FS-2

Fluorescent Lamp F8T5, 12".   Used on Bally 6000 slot on Reels, use starter FS-5

New Flyback transformer for Electrohome model GO7 used in many arcade games in the early 1980's.  Part Number A-29951B.

New Flyback transformer for a Tovis 19"  replacement monitor used in many arcade games from the early 1980's to the 2000's. Model:...

New Flyback transformer for a Tovis/Wells Gardner 19" replacement monitor used in many arcade games from the early 1980's to the 2000's....

Heavy duty rubber foot pad.  Non-skid.  1.5" wide x 5/16" tall.  Comes with screw.  Works great on Mills/Jennings antique slot...

Original Sega/Gremlin marquee.  Pulled from a reel Frogger.  24" x 6" x 3/16" plexiglass. 

Price is for 1 each.  2AG Size (5mm) fuse clip with silver plating.   For (5x15mm) micro fuses. 

Price is for 1 each.  Fuse holder, PC mount clip in type for standard 3AG size 1.25" x 1/4" (6.3x32mm).  For MDL and AGC fuses. ...

Williams Pinball coil G-23-750.  For EM Machines(Electro-Mechcanical). Replaces Williams G-23-750DC - no diode needed. Replaces Williams...

GAL16V8D - Generic Array Logic integrated circuit from Lattice. 20 pin DIP.  25ns speed.  This is a programmable/erasable device used in...

Here is a repair of a Galaxian by Midway.  This game had a bad game board and monitor.  We actually replaced the monitor with one we...

Arcade Game Repair - In Shop - Generic Bring in your machine for repair.  In-shop service is $85 per hour with a 2 hour minimum.   We ...

Genie pinball by Gottlieb circa 1979. This game was a real mess.  We originally turned this job down.  The owner insisted and anted up the...

Gladiators pinball by Gottlieb Premier.  This 1993 game is a rare bird indeed.  This was one of the last games produced by Gottlieb. ...

Glass Trim for Stern Backglass sides.  18" Long, plastic.

Glass Trim for Stern Backglass Top.  26" Long, plastic.

Glass Trim Lift Channel for Stern Backglass Bottom.  26" Long, plastic.

GM76C88L-15 Static Ram 8k x 8, low power standby for battery backup systems.  150ns speed.  28 pin dual inline package (DIP).  These...

Gottlieb Transformer, System 1, Part Number  B-17921 - used pull

Price is for 1 each.   Replacement optical interrupter used on several William/Bally pinball machines. 5 Leg.  It...

Grand Prix pinball by Williams  1976  Electro-Mechanical game.

Rockola Julebox gripper release gear.  pn: 34311-04

Rockola Julebox gripper shaft gear.  pn: 34310-01

Rockola Julebox gripper release gear.  pn: 34312-02

Here is a Nitro Ground Shaker by Bally from 1980.  Unfortunately the cabinet was painted.  The playfield was peeling paint and very dried...

Price is for 1 each.   Replacement optical interupter used on several William/Bally pinball machines.  5 Leg. It...

This repair is on a Harley Davidson Pinball, 2nd edition by Stern  made in 2002.  This game had the dreaded battery leak issue.  If...

Here is a real fun game to play!  Not a fun game to fix!  This machine has 8 flippers, 5 pop bumpers, 3 playfields and plenty of everything...

This repair is on a Hayburners II, a 48 year old game made in 1968 by Williams.   We had to work many extra hours to get this old girl running...

Price is for 1 each.  Header  .100 spacing  40 PIN Break Away.  These fit early Bally/Stern MPU, Solenoid Driver and Lamp Driver...