All Products

Here is a repair of a Williams Defender video game.  This brings back fond memories.  I was invoved with helping Williams get the bugs out...

01/17/2013 16:30:03  Cleaned and waxed playfield. New rubbers and light bulbs. Main issues: Repaired several light sockets (1 missing) on big...

This repair of a Dig Dug by Atari was all about the power supply.  The symptoms were erratic resets and garbage on the screen. The customer had...

Ding Dong EM Pinball by Williams made in 1968. This repair job had all the usual problems of an old Williams game.  The big thing on these is...

Price is for 1 each.  Replacement, Heavy duty diode.  6 amps at 400 volts.  Used on Williams Power Driver boards.  Good for...

Diode, 1 amp 1000 volts. 1N4007 Datasheet

Price is for 1 each.  Diode, 3 amps 1000 volts. 1N5408 Datasheet

Price is for 1 each. Dip Switch 8 position, rocker switches. 

Price is for 1 each. Dip Switch 8 position, rocker switches, with rubber moister shield.

Williams System 11 or System 11a display kit.  Replaces pn:D-10877.  All low voltage 5vdc operation.  Remove the high voltage fuse on...

Williams pinball "Star Trek" diverter arm on underside track.  Common failure.  Ref: A-17268

Bally pinball diverter bracket used on NBA Fastbreak and Cactus Canyon.

This is a repair archive of a Dolly Parton pinball, by Bally from 1979. This Dolly has all the problems found in a vintage Bally.  Bad paint on...

Donkey Kong was a hot game in 1981.  Nintendo had such a hit the price at our distributor went up $2000 for the first 6 months.  If ya had...

Standard Pinball dot matrix display for most DMD type games.  128 dots x 32 dots resolution.  Monochrome. 

Drop Target set of 7 targets.  Marked 1 through 7 in Red.  Used on Sky Jump and Sky Dive. Special Order Only.  Click the Ask A...

Williams pinball drop target reset assembly, 4 bank.  Includes 01-13274 reset plate.

Stern 4-Bank Target Rest Ledge,  Length 5 3/8".

Drop Target Set - for Spirit of 1776 and Pioneer.  Gottlieb pinball machines. Special Order Only. Click the Ask A Question button.

Micro-switch with 90 degree bend at the end of the blade.  Low gram weight actuation. For Bally/Williams pinball games.  Used on the drop...

E-Clip for shafts with a .25" diameter groove.  Very common on Electromechanical Pinball machines. Price is for 1 each.  Picture may vary.

E-Clip for shafts with a .25" diameter groove.  Spring type used on turntables and other applications.  Heavy duty, not for Gottlieb Reels....

This game is not for sale.  This pinball shop-out took a long time to complete.  The customer wanted a "really good job",...

ERF2030 N-Channel MOSFET, CB Radio Upgrade.  This is the famous transistor to out perform several CB radio outputs, long ago.  We found...

Here is a repair and restoration of an Extra Inning Baseball made by Williams in 1962.  These games are not as popular with collectors as they...

Here is a "Man Running Unit" from an Extra Innings baseball game by Williams made in 1962.  The gear motor broke some teeth on the first...

F-14 Tomcat Pinball by Williams from 1987. This poor pinball had a lot of paint missing between the flippers around the lighted arrows.  Looks...

FAN 12 volts,  120mm x25mm with a 3 pin connector.  Low noise.  1500 rpm.

Price is for 1 each.  Fan 40mm x 10mm 12 volts dc.

Cooling Fan 40mm x 10mm 12 volt, 3 Pin connector.  Good for graphic cards, small cpu.

Fan 40mm x 7mm 12 volts dc.  Small, thin cooling fan. 

Fan 70mm x 15mm 12 volts dc.  CPU Cooling. 3 wire

Fiber Link Material for flippers.  Make your own fiber links for the worn out plunger-link assemblies. Comes as a 11 3/4" x 7/8" x 1/8"...

Ball Return link for plunger.  Made of fiber board.  Two are used per plunger.  Price here is for 1 each. Part Number: 01-4251

Fiesta pinball by Williams  1959  Electro-Mechanical game.

Price is for 1 each.  Finger Board for edge connectors .156" x 44 pins.

Price is for 1 each. Dual Finger Board for edge connectors .156" x 56 pins.

Price is for 1 each.  Finger Board for edge connectors .156" x 56 pins.

This Firepower pinball from Williams in 1980 was a very hot game in it's time.  Williams built over 17000 units!  I know because I was...

Fish Tales pinball  by Williams  1992

Williams/Bally Flipper Coil, strongest strength (Blue).  With 2 1/4" sleeve.  FL-11629

Williams/Bally Flipper Coil, standard medium strength (RED).  With 2 1/4" sleeve.  FL-11630

Williams/Bally Flipper Coil, weak strength (Yellow) for short flippers.  With sleeve.  FL-15753

Williams/Bally Flipper Coil, medium strong strength (Orange).  With sleeve.  FL-15411

Bally/Williams pinball flipper coil, electromechanical.  With sleeve.    FL-20-300/28-400

Coil, old style Williams Electromechanical Flipper coil.  FL-21-375/28-400  Includes new 1 3/4" sleeve.  Replacement for...

2" Flat Top Flipper Set. Left and Right flipper included. Has raised letters in blue. Has screw hole on top.  Used on Gottlieb pinball games...

2" Round Top Flipper Set. Left and Right flipper included. Has raised letters in black. Used on many Pinball machines from the 1960's to the 1980's....