All Products

Voltage Regulator for Williams WPC pinball games.   TO3 case, 5 volt, 5 amp.  The main cause of intermittent reset problems. ...

8 AMP GLASS FUSE. 3AG size 1.25" x 1/4" (6.3x32mm)  - SLOW BLOW.  Max circuit voltage 32 volts.

Box of 5 Bussmann MDL 8 amp fuses in the original metal box. 3AG size 1.25" x 1/4" (6.3x32mm) - SLOW BLOW. Max circuit voltage 250 volts. New old...

Advanced Micro Devices D8086-2 MPU IC.  8 MHz operation.  Vintage 1982.  Original MPU in IBM PC computers.  New old stock from...

Intel IO/MPU D8089-3 IC.  Vintage 1979 Input/Output MPU.  New old stock. Datasheet

Intel uD8279C-5 Programmable Keyboard/Display Interface.  Vintage new old stock. Datasheet

Light Bulb #86.   Box of 10.  Mini Wedge base.  6.3 Volt, .20 amp. (also for IGT S+/PE+/Old Bally Slot Machines.  For the...

Fugitsu MLB8742H NMOS Universal Peripheral Interface 8 Bit Microcomputer.  UV erasable.   Requires a 21 volt programmer....

Vintage P8749P Microcontroller made by Intel.  This is a program once device.  This is new old stock from our old parts bins. Datasheet

Box of 10.  Bulb #89 Bayonet Base 13 Volt.  Generally used as a flasher bulb on pinballs.

9 volt battery connector with 6 inch wires. 

Bag of 10.  Bulb #906 Wedge Base 13 Volt.  Generally used as a flasher bulb on pinballs.

Texas Instruments TMS9118NL Video Display Controller (VDP).  A  mid 80's variant of the TMS9918 series chips.  Has 1 pin difference...

Texas Instruments TMS9128NL Video Display Controller (VDP).  A  mid 80's variant of the TMS9918 series chips.  New old stock from our...

Gottlieb Pinball Coil for Ball Return, Out hole, etc.  Will ship with or without diode.  Comes with a 1 5/8" sleeve (pn: A-5064).

Gottlieb Electro Mechanical Pinball Reel coil.  Comes with a 1 1/4" sleeve (pn: A-8111).

Gottlieb pinball coil A-17891.  For Roto-Target.  With diode and 2 1/2" Sleeve (pn: 5172).

William EM (Electro Mechanical) Pinball coil.  Used on many EM games for Pop Bumpers, Drop Targets.  Comes with a 1 3/4" sleeve (pn:...

Williams coil A-23-600.  For EM (Electro-Mechanical) pinball machines.  Used for Stepper Unit "Step Up" and other applications. Replaces...

Flipper Coil  A-25959 used on Gottlieb/Pemier pinball machines.  Includes sleeve.

Gottlieb Electro Mechanical Pinball Pop Bumper Coil.   Comes with a 1 5/8" sleeve (pn: A-5064).

Gottlieb Flipper Coil, A-5141, Gottlieb EM pinballs.

Gottlieb Bells/Chimes coil A-5143.  Comes with 2 3/4" Flange coil sleeve (pn:  A-5142) . This is just 1 of several coils used.  Please...

Gottlieb Pinball coil.  Common coil on Pop Bumpers and Kickers.  With diode and  a 1 5/8" sleeve (pn: A-5064).  24 gauge wire...

Gottlieb Chimes coil A-5194.  Comes with 2 3/4" flange sleeve (pn: A-5146) .  With diode. 24 gauge wire with 780 turns.

Gottlieb Knocker/Bell/General use Coil.  With diode and a 1 5/8" sleeve (pn: A-5064). A general use coil.  Used on Gottlieb Solid State...

Gottlieb Electro Mechanical Pinball Coil.  Used on Target Mechanisms - Bank Reset. Comes with a 2 1/2" standard sleeve (pn: 5172).

Bally EM Striker and Bushing Assembly A-550-06.  Pinball Chime unit plunger with nylon tip.  1 11/16" long.  Hollow tube body. ...

Gottlieb Electro Mechanical Pinball Relay Coil.   Used on Interlock relays.

A-6087, Gottlieb Pinball Coil Sleeve with Flange .  Also known as the Gottlieb Small Bell Sleeve.  Overall length 2".   The short side...

Gottlieb Electro Mechanical Pinball coil.  Used on old style Reels.  Comes with a 1 1/4" sleeve (pn: A-8111).

Coil used on Gottlieb pinball machines for ball gate and other uses.  A-9735 Replacement for R-20-4

Gottlieb EM Hold Coil, A-9736. Replaces R-20-5

Gottlieb EM Hold Coil, A-9738. Replaces A-3498

Gottlieb EM Hold Coil, A-9740

Gottlieb EM Pinball relay coil for double bonus, Target mechanisms, hold coil, etc.... Replacement for R-20-1

Williams/Bally 5" Bell coil A2-23-750.  24 volt coil.  Comes with 2 3/4" flange sleeve (pn: 03-7067-6). 

Williams Chimes coil A2-26-1025.  Comes with 2 3/4" flange sleeve (pn: 03-7067-6).  Also used on Bally, replaces A-26-1025.

Williams/Bally Pinball Bell/Knocker coil A2-26-1300. 50 volt coil.  Comes with 2 3/4" flange sleeve (pn: 03-7067-6). 

Here is Addams Family Gold the "Special Collectors Edition" number 0995.  This machine is in excellent condition!  We took plenty...

Williams/Bally Coil AE-23-800. Comes with sleeve (03-7066 (1 3/4").  Solder eyelet tabs. Used on pop bumpers, outhole kickers and many...

Bally/Stern/Williams pinball coil, part number Comes with with a diode and 1 3/4" sleeve (pn: 03-7066). 

Williams pinball coil AE1-26-1500 with diode.  Comes with a 1 3/4" sleeve (pn: 03-7066).

Bally pinball flipper coil, older electromechanical made before 1978. No Diodes. With 1 5/8" sleeve.

Al's Garage is a rare pinball made by Alvin G in 1992.  The company was short lived (1991-1994).  Parts are hard to find.  General...

This repair is on the computer only of an Aliens Extermination arcade game made by GlobalVR.  This was a service call.  The game showed no...

Black Allen Head socket screw for Data East flipper pawl/crank.  Dimensions #10 screw x 32 threads per inch x 1 3/4" long. Heavy duty black...

Set Screw #10x32 with allen wrench cap.  Used mostly on Bally flipper assemblies from 1975 to 1988.  Holds the crank to the flipper shaft....