All Products

Bally Sky Kings pinball circa 1973. This single player Bally electro-mechanical pinball had a bunch of burned up coils and wires. Must have been...

This pinball was a real mess.  The customer got stuck, paid too much for a "working" game.  We advised not to repair it... but,...

Black Sleeve bumper for pinball machines.  Shorter 7/8"L x 1/2"W x 1/4"I.D.  ref:545-5009-00  Stern/Data East/Sega

Pinball Sleeve, black 1 1/16" tall with a 1/4" hole.

Black Sleeve bumper, Tee Shape, for EM  pinball machines. 

Sleeve bumper for pinball machines.  Yellow 13/16" tall x 3/4" diameter.  ref:23-6770.  Used on spinning lamp assembly on Williams...

Sleeve bumper for pinball machines.  Yellow 3/4" x 5/8".  ref:23-6551

Sleeve bumper cone for pinball machines.  Black 3/4" tall x 5/8" diameter.  Ref: 23-6632

Sleeve bumper cone for pinball machines.  Yellow 3/4" tall x 5/8" diameter.  Ref: 23-6579

Sleeve for pinball shooter rod. 2 1/4" long x 7/16" diameter.  Williams/Bally 03-7357

Price is for 1 each.   Slide Switch Miniature SPDT (Single Pole Double Through).

Slingshot Kicker Head - used on old Bally pinballs.  No Longer available.  Use Williams pn 03-7501.

Williams pinball slingshot kicker head, nylon.  Can be used to replace old Bally pn: C-1062

Here we shopped out a 1991 SlugFest by Williams Pinball.  This pitch and bat game has all the fun stuff of all the old baseball machines crammed...

Williams/Bally pinball coil.  Used to move the eys in Rudy's head.

Snaphat Battery/Crystal for Midway arcade games using the Vegas game board system.  Brand new.  Used in Blitz 2K-Showtime, Gauntlet Dark...

Replacement for the AS-2516-66 Solenoid Expander Board on some Williams Pinball Games.  Used on: Black Belt, BMX, Eight Ball Deluxe, Eight Ball...

Solid State Relay Single Phase water resistant.  Input trigger 3 to 32 volts DC.  Switched load up to 40 amps at 24 to 380 volts AC....

Williams Cyclone Pinball Sound Board.  Good pull.  Sold AS-IS Working.  No warranty for this item. 

We picked up this 1980 Bally "Space Invaders" pinball with instructions to just shop it out but don't go too far.  The customer knew it looked...

Space Odyssey electromechanical pinball made by Williams circa 1976.  This two player pinball sent us looking for missing parts on it's...

This repair shop out is on a Space Station pinball made by Williams in 1987.  This job was standard work except for a missing part.  The...

Price is for 1 each.  4 inch 32 ohm speaker. 

6 inch speaker, 4 ohm 25 watt.  Used on Williams Pinballs and others.  Williams PN:555-12929-00

Bally/Williams pinball Spinner switch.  Also used on Ball Gates.  Includes the diode for newer games or remove it for EM games.  These...

Repair notes of Spirit of 76 Pinball by Gottlieb 1975.  This game is not fore sale.   Started with the cabinet. The back-box is falling...

Spirit pinball by Gottlieb from 1982.  Here is a rare Gottlieb with some interesting bells and whistles!  The slow spinning disc behind the...

Flipper Spring Retainer Bracket for Williams Flippers.  Price is for 1 each.

This Gottlieb "Square Head pinball was almost a lost cause.  We managed to get it running and stopped the playfield from rotting...

Here is a repair of a Star Trek Next Generation pinball by Williams made in 1993.  This is one of our dreaded European models that...

Starter/Condenser for florescent lamps at 14, 15 and 20 watts. 

Starter/Condenser for florescent lamps at 25 watts.

Universal Starter/Condenser for florescent lamps at 4 to 30 watts. 

Starter/Condenser FS-5 for florescent lamps at 4, 6 and 8 watts. 

Williams pinball stepper motor replacement for B-12088.  No connector is included.  The colors may not match your old unit.  Comes...

Stern pinball switch, kick out. Replaces 180-5186-00

Stern, Data East and Sega pinball rollover switch.  Right hand type.  Can be used on Bally/Williams.

Stern, Data East, Sega pinball shooter switch

Stern, Data East, Sega pinball switch with flat blade.  Replaces 180-5190-00

Stern, Data East, Sega pinball switch,  short blade with roller. 

Stern, Data East, Sega switch, fork, verticle up kicker.

Stern, Data East, Sega switch with formed flat blade

Super Spin pinball by Gottlieb  1977  Electro-Mechanical game.

Here is a 1974 Electro-mechanical pinball from Williams.  This game is holding up well after all the years.  The back-glass has started to...

This Supersonic pinball machine repair/shop-out was typical of this series.  These old Bally's almost always need the pins repaired on the power...

Surfer pinball from Gottlieb made in 1976.  This is an electro-mechanical pinball. This is an electro-mechanical we sold.  The cabinet is a...

"Suspense" is a Williams electro-mechanical pinball from Williams circa 1969.  This one is a bit rough but cleaned up O.K...  The...

Replacement for Williams switch 5647-12693-06-china. Yes this is a cheap copy made in China. It has a 6/8" straight blade with a metal roller. The...