All Products

Here is a 45rpm Rowe Jukebox model R86 we fixed up for a happy owner.  This one had a bad CPU Chip that required an upgrade since the chip is no...

Rubber bumper stop for Data East/Stern flipper assembly.   5/8" wide x 1/4" shaft x 3/8" long.  Used on other application also. Happ...

Repair archive of Satin Doll Pinball by Williams.  The repair notes follow: 05/27/20 The game came in with mold, rust and a black substance all...

Price is for 1 each.  2N5060  Thyristor SCR 30V 800mA.  Commonly used on Bally/Stern pinball machine Lamp Driver Boards. Picture is...

Price is for 1 each.  SCR, MCR106 Tryrister 400v.  Commonly used on Bally/Stern pinball machine Lamp Driver Boards. Picture is for...

Price is for 1 each.  Thyristor, Sensitive gate 0.8 A 400 V SCR. P0102 Datasheet

Price is for 1 each.  SCR S4012R 12A 400V, TO220 package. Datasheet

Price is for 1 each.  Small slotted screw, 6x32 threads,  1/4" long.  Set Screw.

Screw Phillips Head #6 x 32 turns per inch x 2 1/2" long.

Screw Slotted #6 x 32 turns per inch x 2 1/8" long.  Note:  The last 1/8" is not threaded.

50 Years old and still working!  At least it is now  This old juke was a little tempermental at first but it finally came to life.  A...

Seeburg Motor Drive Coupler, part number 245083. 1 required. New reproduction.

Seeburg Motor Support Plug. Under the transport motor. 1 required. New reproduction.

Seeburg Jukebox Needle for Pickering 340D cartridge. Diamond, new. Sold in pairs. Fits many models. Stereo.

Seeburg Rubber Bumper. End of travel bumper on transport frame. 2 required.

Seeburg Transport Motor Mount Rings for 4 wire motor. 2 required. New reproduction.

Seeburg Turntable Rubber Drive Bushing. 2 required. New reproduction.

Sega Pinball Large 192x64 dots.  This is a GOOD PULL from a working game.  No missing dots or lines.  Sold AS-IS Working.  No...

Price is for 1 each.  SFH6106-3 - Optocoupler, Photo-transistor Output.  We use these on Bally Slots Hopper Controller board. Datasheet

Williams Pinball Flipper Coil.  SFL-19-400/28-400 Used on Algar, Alien Poker, Black Knight,  Black Knight LE, Blackout, Firepower, Jungle...

Williams Flipper Coil, with diode and sleeve.  pn: SFL-20-300/30-800-DC Gorgar, Hot Tip, Lucky Seven, Stellar Wars, Pokerino, World Cup,...

Generic Pinball Shooter rod assembly, no logo, black handle.  Fits most newer pinballs. Williams, Bally, Stern and others.  Includes black...

Pinball "Beehive" style shooter housing.  Used on Gottlieb, Chicago Coin and others. Screws included.

Replacement Shooter Rod for pinball games.  8-1/4" with black knob.  Measured from knob rim to end of shaft.   Shaft length is 7...

Shooter Rod E-Clip for pinball.

Replacement Shooter Rod for Bally/Williams  pinball games.  8-3/4" with polished pointed knob (Point to Shaft End).  Shaft length is 7...

Replacement Shooter Rod for Gottileb pinball games. Knob rim to end of shaft is 7 3/4".  Shaft length is 7 3/16".   Shaft to "E" clip notch...

Shooter Rod Nylon Housing used on older Gottlieb and Bally pinball machines.

Shooter Rod Trim Plate used on older Gottlieb and Bally pinball machines.

Shooter Spring Max Strength for pinball machines.  The most powerful strength pinball shooter rod spring.  Sometimes painted RED. ...

Standard pinball shooter spring.  Medium strength not painted, (Silver).  Sometimes called Medium Strength.  Used on many makes and...

Shooter Spring Very Weak for pinball.  Blue.  Sega, Stern part number

Black rubber shooter plunger tip for pinball machines.  ref:545-5027-00  ref:A1344

Price is for 1 each.  SK3443 Transistor Picture is for reference only, actual device may differ. Datasheet

Bally Sky Kings pinball circa 1973. This single player Bally electro-mechanical pinball had a bunch of burned up coils and wires. Must have been...

This pinball was a real mess.  The customer got stuck, paid too much for a "working" game.  We advised not to repair it... but,...

Black Sleeve bumper for pinball machines.  Shorter 7/8"L x 1/2"W x 1/4"I.D.  ref:545-5009-00  Stern/Data East/Sega

Pinball Sleeve, black 1 1/16" tall with a 1/4" hole.

Black Sleeve bumper, Tee Shape, for EM  pinball machines. 

Sleeve bumper for pinball machines.  Yellow 13/16" tall x 3/4" diameter.  ref:23-6770.  Used on spinning lamp assembly on Williams...

Sleeve bumper for pinball machines.  Yellow 3/4" x 5/8".  ref:23-6551

Sleeve bumper cone for pinball machines.  Black 3/4" tall x 5/8" diameter.  Ref: 23-6632

Sleeve bumper cone for pinball machines.  Yellow 3/4" tall x 5/8" diameter.  Ref: 23-6579

Sleeve for pinball shooter rod. 2 1/4" long x 7/16" diameter.  Williams/Bally 03-7357

Price is for 1 each.   Slide Switch Miniature SPDT (Single Pole Double Through).

Slingshot Kicker Head - used on old Bally pinballs.  No Longer available.  Use Williams pn 03-7501.

Williams pinball slingshot kicker head, nylon.  Can be used to replace old Bally pn: C-1062

Here we shopped out a 1991 SlugFest by Williams Pinball.  This pitch and bat game has all the fun stuff of all the old baseball machines crammed...