All Products

Here is a Pinbot pinball machine made by Williams in 1986.  This is one of the great ole pinballs that made a ton of money on the streets. ...

This is a pitch and bat game from 1959 called Pinch-Hitter Deluxe by Williams.  This was a repair only since the machine was just...

This pinball repair of a 1975 Gottlieb "Pioneer" was a 7 day project.  Most of the time I can go through one of this type in 4 days...

Here is an example of a repair shop nightmare.  This 1978 Bally Playboy had been sitting in a Texas barn that was not exactly protecting the...

Plunger and Link Assembly,  With fiber link.  Bally Hi-Deal 5/75 To Space Invaders 4/80.  Fiber Link is 9/16" hole to hole. ...

Flipper plunger and link assembly for Bally/Williams pinballs.  New type with thicker link(1984 - 1998).  Will not work on older pawl that...

Plunger and Link assembly for Williams/Bally pinball machines.   This is the Tapered(thin) version link, 1980 to 1991.

Plunger Fiber Link,  Bally Flipper.  Bally Hi-Deal 5/75 To Space Invaders 4/80. Pinball.  Link is 9/16" hole to hole. 1 1/8" total...

Plunger Fiber Link, long,  Bally Air Aces 2/75 To Wizard 5/75. Plunger Fiber Link,  Bally Flipper.  EM machines. Pinball.  Link...

Complete flipper plunger link and pawl assembly for Williams Pinball. Left Side.  A-15848-L

Complete flipper plunger link and pawl assembly for Williams Pinball. Right Side.  A-15848-R

Bally "Nyliner" snap in bearing.  For Bally "Linear" motion flipper plunger bracket.  PN: C-537-8  Bally

Contact adjuster-L shaped  Useful on electromechanical pinball machines.

Here is an upright model Pole Position made by Atari in 1983.  This was converted with new eproms to a Pole Position II. These games can be...

Pop Bumper Base - old style Bally/Williams C-115-1, 03-6009-A5 Gottlieb A-10432 Stern/Data East/Sega 545-5195-00

Pop Bumper Body for newer style pinball games.  For Williams, Bally and Stern. Bally/Williams 03-7443-5, Stern/DE/Sega 545-5197-00 

Bumper Body (non pop - no solenoid - no ring)  "Dead Bumper" Bally C114, Gottlieb 25A. Replaces Chicago Coin pn 16510, Gottlieb pn B-10431, and...

Pop Bumper Body - old style, used on many makes and models.  Williams 3A-6008, Bally C114-3, Gottlieb 8997,  Stern(Old)...

Pop Bumper Body - very old style from the 50's and older. Gottlieb 25W

Gottlieb Pop Bumper body with Blue rings.  PN: A-13905-B.

Gottlieb Pop Bumper body with Red rings. PN: A-13905-R.

Pop Bumper Body for Gottlieb pinball machines. Red Diamond pattern.  A-10436-R

Pop Bumper Body for Gottlieb pinball machines. Yellow Diamond pattern.  A-10436-Y

Pop Bumper Cap Deco Slant Blank with white top and yellow rim.

Pop Bumper Cap, 10 or 100 Points When Lit. Blue letters Green Sun.

Pop Bumper Cap, 10 or 100 Points When Lit. Blue letters Yellow Sun.

Pop Bumper Cap, Bally, 1000 points when lit Red Sun design.

Pop Bumper Cap, Gottlieb, 100 points when lit with blue letters.  A-11426-B

Pop Bumper Cap, Gottlieb, "Moves 10X Target Lite When Lit"  with Red letters. A-11426-B

Pop Bumper Cap, Points 100 When Lit.  Red letters, red Sun.

Pinball Pop Bumper Cap, Sun 10.  With Red numbers and red sun.

Pop Bumper Cap, Sun 100 Squigle with blue letters and red sun.

Pop Bumper Rod And Ring - Williams/Bally, Gottlieb.  Fits most pinball machines.  With lock nuts. Williams A-4754, Bally A-1873, ...

Pop Bumper Shield.  Put these on to proctect the playfield around the bumpers.  Bally M-1787

Pop Bumper Skirt, Blue.  Used on most pop bumper assemblies

Pop Bumper Skirt, Green with pointer tip.  Used on most pop bumper assemblies.  Gottlieb.

Pop Bumper Skirt, Orange.

Pop Bumper Skirt, Red.  Used on most pop bumper assemblies

Pop Bumper Skirt, Teal.  Used on most pop bumper assemblies.

Pop Bumper Skirt, White.  Used on most pop bumper assemblies

Pop Bumper Skirt, White with pointer tip.

Pop Bumper Skirt, Yellow.  Used on most pop bumper assemblies

Pop Bumper Spoon for pinball games. 

Fiber Yoke for pop bumper linkage.  Fits most manufacturers pinball pop bumpers. Heavy Duty, hard to break. This is an aftermarket re-design...

Bally/Williams Yoke Fiberboard for pop bumper linkage.  Fits most manufacturers pop bumpers.

Metal Yoke for pop bumper linkage.  Fits most manufacturers pinball pop bumpers. Heavy Duty, hard to break. This is an aftermarket re-design...

Bally/Williams Metal Yoke PN: 01-5492,  for pop bumper linkage.  Fits most manufacturers pinball pop bumpers.

Handy tool to hold the top-side of metal posts while turning cap nuts or other uses.