All Products

Lock Cam 1 1/4" long.  Measured center of hole to end.

Lock Cam, 1 1/8" long with 1/8" off-set.  Measured - center of hole to end.  Bally Slot PN: P-00758-0093  S6000/Alpha

Lock Cam, 1 3/4" long

Lock Cam, 1 3/4" long with 1/2" off-set.  Measured - center of hole to end.

Lock Cam, 1 3/4" long.  Measured - center of hole to end. Offset 1/4".  IGT S+ and S2000 slot machine main door lock.

Lock Cam, Cash Box - JCM WBA. 5/8" long.  Measured - center of hole to end.

Lock for Pinball Backglass 5/8" with 2 keys and 1" cam.

Williams/Bally backglass lock kit.  Includes 5/8" lock with key, two 8x32 Torx security screws, cam and mounting plate.  The plate mounting...

Pinball metal lock plate to secure the backglass.  Used on Bally/Williams and can be made to fit others.  4" long, 3 1/4" hole to hole...

Pinball metal lock plate to secure the backglass.  Used on Data East, Sega and can be made to fit others.  5" long, 4" hole to...

Standard coin door double bit lock. 7/8" depth with 2 keys #7500. Includes a 1 1/4" cam. Keyed alike. Fits most arcade game's coin door, cash-box...

Replacement Lock for Mills Slot Machine back door.  "One Armed Bandit" types.  Can be used on Jennings with modifications.  Look at...

Lock, round, 5/8". Keyed alike.  Key # X01 (sold separately, click here).

Keyed alike Standard Low Security round tubular 5/8" lock kit.  This lock kit comes with 1 key #6086, a 2" cam, a 1 5/8" offset cam, 1 wood door...

Standard coin door lock.  Keyed alike.  Key #700.  Single Bit, 7/8" depth with 2 keys and cam.

Logic Probe for repairing printed circuit boards.  Tests all logic families.  Two frequency audio beeper.  Memory Function.

Lost World Pinball by Bally made in 1978.  We sold this game before we could post it on the website.  As you can see it is in really great...

Lost World by Bally.  This was one rough pinball to shop out.  The customer was informed the paint on the playfield was too far gone. ...

Magnet Coil for Data East/Sega/Stern under playfield magnets. 511-5065-ND

Magnet Controller Board to Data East Pinballs

Magnet Core Hex Nut for Data East/Sega/Stern under playfield magnets.

Magnet Core Pug for Data East/Sega/Stern under playfield magnets.  530-5320-00

Magnet Threaded Core Weldment Assembly for Data East/Sega/Stern under playfield magnets.  515-6141-01

Used Mars AE-2451-U5 bill acceptor Series 2000.  Takes $1, $2 and $5.  115 volt AC version.  Used pull, tested.  With adapter...

A basic volt/ohm meter with a backlight for the display.  Small and easy to use.  Has diode test and continuity beeper.

Price is for 1 each.  Mica Insulator for TO-3 Transistors.  Mainly used on Monitors, Amplifiers and Analog Power Supplies..

Price is for 1 each.  Replacement Micro Switch for Arcade Push Buttons and Joysticks.  These common switches have .187" width contact...

Price is for 1 each.  Replacement Micro Switch for Joysticks that use 1" blades.  These common switches have .187" width contact connector...

Generic Micro Switch with a 2" x 5/32" blade actuator.  It has a 34 gram resistance at the end of the blade.  A pinball has no problem...

Here is a Mill's Slot Machine "777".  This repair had to start with a full de-grease procedure.  You can see some of the...

Mills slot machine replacement glass for the spinning Reel Windows. Measures 3/16" thick x 1 3/4" wide x 4 1/4" long.  Price is for 1...

Here we repaired a 1987 Williams "Millionaire.  It's a bit rough but plays great!  Someone put the factory optional playfield protective...

This is a repair of a Black Cherry slot machine made by Mills.  It's a great example of the grand old One Armed Bandit games.  The...

This repair is on a Mills Slot Machine named "Deuce 2 Wild".  This job had the usual issues with dried up grease and oil, dirty mechanism and...

This game is NOT for sale.  This is a customer repair.  Mills Operator Bell, 1929, Jackpot Poinsetta Owl.  Did a complete tear-down...

Mills slot machine replacement glass for the Role-a-Coin Window. Measures 1/8" thick x 1 1/8" wide x 6 1/8" long. Some corner chipping is normal and...

Mills slot machine replacement glass for the Jackpot Window.  Measures 3/8" thick x 3 3/4" wide x 5 1/2" long.  This is the thick 3/8"...

This is a repair archive of a Mills slot called Golden Nugget.  The service notes follow: 03/25/20 -This game was dropped, hard.  Pulled...

Mills War Eagle slot machine

Here is a Miss-O electromechanical pinball by Williams made in 1969.  We purchased this pinball for resale.  We did a complete shop-out...

This Missile Command by Atari had game board problems and monitor issues.  Unfortunately for the customer these two failures did not occur at...

Price is for 1 each.  MJ11015G Transistor PNP Darlington, 120v CE, 30a Picture is for reference only, actual device may differ. Datasheet

Price is for 1 each.  MJ11016G Transistor NPN Darlington, 120v CE, 30a Picture is for reference only, actual device may differ. Datasheet

Transistor MJE3055 Datasheet

Here is a Monopoly Pinball made by Stern in 2001 - 2002. This is a well made game that had proven revenue numbers.  Most ended up in homes, as...

Monte Carlo Pinball by Gottlieb/Premier  1987 01/19/2013 09:38:45  Picked up @ 01/12 02/17/2013 15:53:57  Cleaned and waxed, all new...

Price is for 1 each.  MPSA06 Transistor, NPN 80v CE, 500ma Picture is for reference only, actual device may differ. Datasheet

Price is for 1 each.  MPSA42 Transistor, NPN 300v CE, 200ma Picture is for reference only, actual device may differ. Datasheet