All Products

Flipper Bushing Williams Pinball - old style.  A little longer than new style.  Stems are 5/8" and 15/16".  For games made from 1969...

Flipper Bushing Williams Pinball - Zipper Type, very old style.  1 3/8" long.  Stems are 7/16" and 13/16".

Flipper Bushing, white, for Data East and Stern Pinballs.  Stems are 5/16" and 1 1/16".

This Flipper Clown from Gottlieb was made way back in 1962.  We picked it up from a storage unit... not a good place to store a pinball. ...

Williams/Bally flipper coil stop.  A-12390  Used on games made 1993 to 1999.

Gottlieb Flipper backstop for pinball games made from 1989 to 1992.

Gottlieb pinball flipper coil stop part number A-17908.  Used on Gottlieb electronic pinball machines, 1977 to 1989.

Bally Flipper coil stop.  For machines made 05/1980 to 11/1988.  Also called a "Core Plug" by Bally.  Used on Linear...

Bally/Williams coil stop for games 1988 to early 90's. Part Number A-12111

Bally Pinball flipper coil stop. PN: A-613-67 For machines made from 05/1975 to Space Invaders 04/1980. This is an enhanced upgrade.

Flipper Crank (Pawl) for left side flipper assemblies, pn: A-17050L. Flipper Crank only. Can be used with plunger, link and pawl assembly pn: A-15848.

Flipper Crank (Pawl) for right side flipper assemblies, pn: A-17050R.   Flipper Crank only.  Can be used with plunger, link and pawl...

End of Stroke switch for Data East and early Sega pinball flippers.  Normally closed.

End of Stroke switch for Williams/Bally pinballs flippers.  Normally Open.  SW-1A-194

Common Replacement End of Stroke switch for pinball flippers.  Normally closed.  Originally made for Williams games made from 1984 to...

Gottlieb Pinball Flipper End of Stroke switch with mounting bracket.  Left Side. Used on electro-mechanical games from 1955 to 1976. ...

Gottlieb Pinball Flipper End of Stroke switch with mounting bracket.  Right Side Used on electro-mechanical games from 1955 to 1976. ...

Data East End Of Stroke switch with extended blade.  High current normally closed operation.  Perfect for early Williams electronics...

Bally Flipper End Of Stroke switch for electro-mechanical pinball machines.  Also used on early Bally Electronic pinballs, such as Kiss.

Bally End Of Stroke "form A" switch.  Used on very early Bally EM games all the way up to 1988 electronic models.  You need this on games...

Stern Pinabll End of Stroke switch for flippers. 

Bally "High Current" End of Stroke switch.  Used in games from 05/1980 to 11/1988.  PN: ASW-A20-34

Bally/Williams flipper opto board.  New type 2 style.

Flipper Paddle for Gottlieb pinball machines from mid 1970's-Late 1980's.  

Left Hand Side Lever Assembly/Pawl. For flipper assembly replacement. Bally Part number A-3711-3. This is an advanced upgrade.

Bally Flipper Pawl, Left side.  For Linear flipper assembly.  A-3711-4. Enhanced version.

Right Hand Side Lever Assembly/Pawl. For flipper assembly replacement. Bally Part number A-3711-2. This is an advanced upgrade.

Bally Flipper Pawl, Right side.  For Linear flipper assembly.  A-3711-5.  Enhanced version.

Bally Flipper plunger for linear flipper assembly (1980 to 1988). Bally PN: S-496-217

Relay - 4 pole double throw, 6 volts, 5 amps.  This is the original Flipper Ground relay on the CPU/driver boards for many pinball models. ...

Flipper Return Spring - Bally.  Linear flipper assembly.  SP-100-363

Williams/Bally flipper return spring.  3/16" round x 1 1/16" loop tip to loop tip.

Flipper Return Spring, tapered.   Williams Firepower 3/80  To Hurricane 08/91  PN: 10-376. Most common return spring with...

Flipper screw for many older pinball machine flipper paddles.  The screw is 6x32 threads and 1 1/4" long.  It has a slotted head with an...

Flipper Screw for Gottlieb/Premier pinball machines.  Gottlieb PN: FA-77 made for the 3" flipper paddle..  Threads are 8x32 x 1/2"...

Fluorescent Lamp F14-T8, 15".  14 Watts, use starter FS-2

Fluorescent Lamp F15-T8, 18".  15 Watts, use starter FS-2

Fluorescent Lamp F8T5, 12".   Used on Bally 6000 slot on Reels, use starter FS-5

New Flyback transformer for Electrohome model GO7 used in many arcade games in the early 1980's.  Part Number A-29951B.

New Flyback transformer for a Tovis 19"  replacement monitor used in many arcade games from the early 1980's to the 2000's. Model:...

New Flyback transformer for a Tovis/Wells Gardner 19" replacement monitor used in many arcade games from the early 1980's to the 2000's....

Heavy duty rubber foot pad.  Non-skid.  1.5" wide x 5/16" tall.  Comes with screw.  Works great on Mills/Jennings antique slot...

Original Sega/Gremlin marquee.  Pulled from a reel Frogger.  24" x 6" x 3/16" plexiglass. 

Price is for 1 each.  2AG Size (5mm) fuse clip with silver plating.   For (5x15mm) micro fuses. 

Price is for 1 each.  Fuse holder, PC mount clip in type for standard 3AG size 1.25" x 1/4" (6.3x32mm).  For MDL and AGC fuses. ...

GAL16V8D - Generic Array Logic integrated circuit from Lattice. 20 pin DIP.  25ns speed.  This is a programmable/erasable device used in...

Here is a repair of a Galaxian by Midway.  This game had a bad game board and monitor.  We actually replaced the monitor with one we...

Arcade Game Repair - In Shop - Generic Bring in your machine for repair.  In-shop service is $85 per hour with a 2 hour minimum.   We ...